热门行业:   机械设备网| 安防网| 化工网| 电子网| 仪器仪表网| 农业网| 建筑建材网| 五金网| 照明网|
发布信息当前位置: 首页 » 供应 » 五金网 » 通用零部件 » 轴承 »

江苏SKF轴承润滑检测与老化

点击图片查看原图
品牌: SKF轴承
包装: 商包
质量体系: ISO9000
质量保证: 假一罚百
单价: 452.00元/套
起订: 1 套
供货总量: 3000 套
发货期限: 自买家付款之日起 1 天内发货
所在地: 上海
有效期至: 长期有效
最后更新: 2018-06-11 14:27
浏览次数: 0
购买
公司基本资料信息
 
 
产品详细说明
 在使用江苏SKF轴承时,油的作用起着非常重要的作用,如果使用变质润滑脂,不但不起作用,而且会损坏进口轴承并降低其寿命。因此,如何测试轴承润滑脂的有效性显得尤为重要。

In the use of Jiangsu SKF bearings, the role of oil plays a very important role, if the use of metamorphic grease, not only does not play a role, but also will damage the imported bearings and reduce their life. Therefore, how to test the effectiveness of bearing grease is particularly important.

一种和江苏SKF轴承润滑油流量测量方法

A method for measuring the flow of lubricating oil in Jiangsu SKF bearing

找到两个杯子,一个检查,另一个在桌子上,另一个在桌子上,润滑油充满了30-40厘米高的桌子,倾斜,使润滑油慢慢流入空杯,观察流量情况。质量问题。如果润滑油流出,润滑油应该是长的、均匀的、连续的。现在油的流动速度很快,很慢,有时会有很多油流下来。

Find two cups, one check, the other on the table, the other on the table, the lubricating oil is full of 30-40 centimeters high table, tilting, so that the lubricating oil slowly flow into the empty cup, observe the flow situation. Quality problems. If lubricating oil flows out, the lubricating oil should be long, even and continuous. Now the oil flows very fast, very slowly, sometimes there is a lot of oil flowing down.

二、江苏SKF轴承润滑油滴迹法

Two, Jiangsu SKF bearing lubricating oil drop trace method

找一个干净的白色滤纸,滴在滤纸上的油,在漏油后,如果漏油,如果表面有黑色粉末,触摸会产生一种抵抗的感觉,表明润滑油有很多杂质,好的润滑油不是粉末,接触干燥顺畅。手。一丝黄色

Find a clean white filter paper, drops on the filter paper oil, after oil leaking, if the oil leakage, if the surface has black powder, touch will produce a feeling of resistance, indicating that the lubricating oil has a lot of impurities, good lubricating oil is not powder, contact dry smooth. Hand. A glimmer of yellow

三、江苏SKF轴承润滑脂手捻法

Three, Jiangsu SKF bearing grease hand twisting method

润滑油在拇指和食指之间反复翻转。润滑性好,润滑性好,磨屑少,无摩擦。如果在手指之间感觉到手指之间的摩擦摩擦,则表明润滑油中有更多杂质,不能再使用。应更换新的润滑油。

The lubricating oil flipped repeatedly between the thumb and the index finger. Good lubricity, good lubricity, less abrasive wear and no friction. If the friction and friction between fingers feel between fingers, it indicates that there are more impurities in the lubricating oil and can not be used again. New lubricants should be replaced.

四、江苏SKF轴承润滑脂光法

Four, Jiangsu SKF bearing grease light method

当天气好时,使用螺丝刀将润滑剂提升到水平面的45度角。在光的照射下,我们可以清楚地看到,润滑油中没有碎片是好的,并能继续发挥作用。如果残留物过多,应更换润滑油。

When the weather is good, use a screwdriver to raise the lubricant to the 45 degree angle of the horizontal plane. Under the irradiation of light, we can clearly see that no debris in lubricating oil is good and can continue to play a role. If the residue is too much, the lubricating oil should be replaced.

文章来自:江苏SKF轴承 www.wh-skf.com

The article comes from: Jiangsu SKF bearing www.wh-skf.com

文章来自:江苏INA轴承 www.ina-china.cn

The article comes from: Jiangsu INA bearing www.ina-china.cn

文章来自:江苏NSK轴承 www.klbbearings.com

The article comes from: Jiangsu NSK bearing www.klbbearings.com

0条 [查看全部]  相关评论
 
更多»本企业其它产品

[ 供应搜索 ]  [ 加入收藏 ]  [ 告诉好友 ]  [ 打印本文 ]  [ 违规举报 ]  [ 关闭窗口 ]


  •